Are you sick and tired of your old gas line systems and want to know the cost of running a gas line by a project?
Well, with our research and personal experience, we will guide and advise you about the average cost of it.
The average cost to run a gas line project for minimal projects varies from $350 to $745.
As far as complex projects are concerned, they can go to $1000 and up depending on the area covered.
The cost per linear foot of gas installation is $12 to $25, including labor charges, materials used, and of course, the length of the area.
Without further ado, let’s discuss the cost of running a gas line for different projects:
Cost to Run a Gas Line by Project:
The cost to run a gas line depends on the different projects it is aimed to be installed.
For example,
- Kitchen
- Garage
- Basement
- Backyard
You must take the help of a professional to get this work done as they know how to deal with gas.
We all know how dangerous gas can be, right?
The conversion of electric or natural gas or an addition of an appliance will require new pipes.
Minor projects like small appliances can cost an average of $500 to $2000.
While the larger projects can price you $2000 to $5000.
It is according to the diameter and length per linear foot.
For example, if you have to extend your gas line to hundreds of meters, it will charge you more.
Related Reading: Gas Double Oven – Read More.
Gas Line Extension:
If you want to move your appliances connected to gas lines, you should opt for a gas line extension instead of installing a new one.
It is cost-effective and will not be a burden on your pocket.
Extending your gas line may cost you $15 to $25 per linear foot.
New Gas Line Installation:
A new gas line installation is mandatory for a newly built setup, be it a house or any other place.
It is also significant to install a new gas line if your old ones are in a disastrous and vulnerable state.
Many homemakers invest around $24 per linear foot on a brand-new gas line.
A 30-foot-long gas line can cost $640 to $885, including drilling, threading, and installing charges.
Cost to Move a Gas Line or Pipe:
If you want to move a gas pipe or line, the cost is $15 to $25 per linear foot.
The average price of a complete project is approximately $1000 to $1200.
This includes basic labor, trimming, installing new valves, and fitting and molding procedures.
Cost to Repair Gas Lines:
The gas line repair costs around $6 to $7 per linear foot and a total labor cost of $75 to $150 per hour.
If you are tight on budget and want to repair your old gas lines, it can cost you around $150 to $650 per appliance.
But if you want to repair the whole gas line across the house, the average cost will be $3000 to $7000 per distance and length of the material used.
The cost may vary according to the following factors:
1. Excavation repair:
If the pipe is inaccessible, the cost increases from $1000 to $5000.
2. Drywall repair:
The leakage in the drywall can also increase the cost of repairing gas lines.
3. Testing cost:
If you desire a perfect investigation of the leakage to avoid this problem in the future, you can call for a professional visit.
It will cost you $50 to $75 per visit.
Gas pipe prices by material:
The gas pipe prices vary according to the material.
The prices of some of the pipes commonly used are given below:
1. High-density polyethylene pipes:
The high-density polyethylene pipes are durable and flexible.
They are multi-tasking and cost $0.18-100 / meters.
2. CSST piping:
The CSST pipe is used for the kitchen and garage because of its high elasticity and longevity.
The cost of these pipes according to inches is:3/4 inch x 150 ft is $0.83 per meter.
1-inch x 150 ft is $1.16 per meter
1. Copper pipes:
The powerful and highly tensile copper pipes come in different sizes, varying from half-inch to a maximum of 4-inch.
These pipes cost from $2 – $4 per meter.
2. Galvanized steel pipe:
The galvanized steel pipe costs around $28.1 per foot and $8.5 per meter.
The size varies from half to 8 inches.
They are highly recommended due to their high-end performance and immense strength.
3. Black iron gas pipe:
The co t of a black iron gas pipe is 5.49 per foot.
It is rust and corrosion-free.
It maintains an airtight seal and is considered one of the best gas line pipes.
Labor Cost To Install a Gas Line:
You have to take a professional’s help to install a gas line.
Different areas in the home can need a gas line connection.
We have sorted out the most common ones to help you get an estimate while renovating or designing your place.
The labor cost varies according to the appliances and distance of the gas line.
1. To Kitchen Stove:
The average cost of installing a gas line to a kitchen stove is $200 to $1000.
Depending on the length of the pipe needed to join the main gas supply, it can be more.
The cost per linear foot is $15 to $25 per hour.
2. To Convert Electric Stove To Gas
The cost of converting an electric stove to gas is $125 to $2,000.
The labor charges for this work are $6 to $10.
In this case, the cost is high as you will need the assistance of both an electrician and a plumber.
3. To Grill or Fire Pit:
The labor cost of installing a gas line to a grill or fire pit varies from $12 to $75 per foot for new installation.
The total cost will be $350 to $750 on average.
As it can involve the unground procedure, trenching and leveling cost is also included.
Considerations When Hiring a Gas Fitter:
While hiring a gas fitter, you should be cautious and investigate well.
It would be best if you did not ignore the fact that installing a gas line is a process that can be complex and dangerous simultaneously.
Many online services are available for this cause.
But considering the following points in your mind while selecting the person for the job will benefit you.
Related Reading: Design Rules Of Kitchen – Click Here.
1. An on-site quote is crucial:
A highly professional gas fitter will always come and see the work that is required.
He will give you a quote after properly investigating the areas involved.
It is crucial because an estimate cannot be given via call.
It has to be checked, and the material needed must be informed to the customer before starting the work.
2. Read the customer service reviews:
When hiring a gas fitter, you must ponder about customer service.
A good service provider will get back to you even after completing the task and visit in case of any unfortunate fitting problems.
The reviews of people online must also be read before the hiring process,.
The ratings of that site can keep you away from any issues later on.
A clean-up after the job:
You must ask the gas fitter whether he would clean up the place or working area after the installation or not.
This is very important because tidying up stains and clutter is a part of their job and should be told beforehand.
The cost also includes the cleaning procedure after the task.
However, if you want to save a few bucks, you can do it yourself.
1. Inspection of the gas line after installation:
Once the gas fitter has completed the work, you must test the gas line for leakage and give a 100 % guarantee after performing the safety check.
In case of any leakage, he must inform you of the issue and redo the whole process.
2. Properly trained and educated personnel:
The gas fitter must be certified and properly trained.
It would be best if you didn’t forget that gas fitting is an intricate and complex procedure involving very minute technical details.
The company you are hiring must share the documentation and certification of the gas fitter for your assurance.
3. Is the person who is inspecting the same who will do the job?
This point is a word for thought.
You must be wise enough to ask the person who comes for an investigation whether he will be doing the job himself or will send some other labor.
The certification must be provided if he plans to send someone else.
Cost to run a gas line to the kitchen – FAQs
1. What is the cost to run a gas line to the kitchen island?
The average cost range of running a gas line to the kitchen island is $355 to $743.
2. What is the cost to run a gas line from the basement to the kitchen?
The cost of running a gas line from basement to kitchen is $15 to $25 per linear foot.
3. What is the cost of running a natural gas line per foot?
The cost to run a natural gas line per foot is $0 to $2000 from the street to your house.
This is an added feature to any inner gas lines or extensions required to be installed; thus, the cost may increase.
4. What is the cost to run a gas line to the garage?
The cost to run a gas line to the garage is $8 to $16 per linear foot.
However, it can increase if the ways going to the garage are complex and need amendments.
5. Who can run the gas line to the kitchen?
Licensed plumbers can run a gas line to the kitchen at the cost of $45 to $150 per hour.
6. Can you run your gas line?
Yes, you can run your gas line with some DIY methods.
But you must do it properly after obtaining a permit and getting it checked after installation.
7. Who installs gas lines for stoves?
A plumber is a gas safety expert and installs a line for stoves.
He needs to be certified.
8. Do I need a permit to run a gas line?
Yes, it would be best if you had a permit to run a gas line.
Many cities’ authorities issue this permit to the individuals after ensuring their documentation.
If you don’t get a permit, you can get involved in legal actions in case of an accident.
9. What is the underground gas line installation cost per foot?
The average underground gas line installation cost is approximately $12 per linear foot.
The prices fluctuate between $10 to $25 inc ding the process of trenching, backfill, shaping, etc.
However, complex and complicated d underground fitting can go up to $75 per foot.
10. Do plumbers install gas lines?
There are specialty plumbers who can install gas lines.
They have certifications to work on gas-powered appliances and gas water heaters.
You must remember these points while hiring one for a gas line fitting.
Related Reading: Basic Standard Dimensions Of Kitchen – Click Here To Read More.
The Bottom Line
The cost to run a gas line during the project depends on the distance and the material used in the complete procedure.
Different gas line installation costs usually fluctuate between $500 to $ 5000.
The cost can also vary according to the labor you intend to get assistance from.
The labor cost will differ if you want gas line installation from a kitchen to a garage or a grill.
You must consider asking a few questions from the plumber you hire and be wise to check the certification.
We hope that our research will be fruitful for you.
