★ Black Friday · Fri Nov 27★ Cyber Monday · Mon Nov 30★ Shop the deals →★ Gift guides for every cook★ See the gift guides →★ Black Friday · Fri Nov 27★ Cyber Monday · Mon Nov 30★ Shop the deals →★ Gift guides for every cook★ See the gift guides →

How to Install a Countertop Water Filter: Step by Step

How to Install a Countertop Water Filter: Step by Step

Most countertop filters need no plumber and no plumbing work. The steps depend on the type: faucet diverter, countertop reverse osmosis or gravity tank.

Faucet diverterCountertop ROGravity

Installing a countertop water filter is one of three jobs: screwing a diverter onto the faucet, setting up a countertop reverse osmosis unit, or assembling a gravity tank. None of them needs a plumber.

The step people skip is the first flush. Every type needs its first water run through and poured away.

Quick answer

Faucet-connected: unscrew the aerator, screw on the diverter (with an adapter if the threads do not match), push in the tubing, then run cold water through for about 10 minutes. Countertop RO: fit the filters, fill or connect it and pour away the first runs. Gravity: fit the elements hand tight, fill the top and pour away the first batch.

Step-by-step guides for each type, a fix list and the parts that help are below.

Product links go to Amazon. As an Amazon Associate, Kitchen Guide 101 earns from qualifying purchases.

Filters and Parts for the Job

Setup details are from each maker’s guide. Tap any name to see it on Amazon.

ProductTypeHookupWhat you needBest forPrice
Aquasana Countertop Water Filter with Faucet DiverterFaucet diverterRemove the aerator2 metal adaptersStandard faucetsSee listing
APEC Countertop Reverse Osmosis Water Filter (RO-CTOP)Countertop RODiverter with a drain outletSeveral valve adaptersFaucets with an aeratorSee listing
AquaTru Classic Countertop Reverse Osmosis Water PurifierPlug-in RONo faucet hookupFilters twist inAny spot near an outlet$$$
Waterdrop King Tank 2.25-Gallon Gravity Water FilterGravity tankAssemble and fillNo toolsAnywhere on the counter$$
Faucet Aerator Adapter Kit, Male and Female ThreadsAdapter kitBetween faucet and diverterMixed thread sizesOdd faucets$
Rubber Grip Pads for Jars and LidsGrip padOn the aeratorUnscrewingTight aerators$

Details are from each maker’s guide or listing at time of writing and can change. Price tiers: $ lowest in this group · $$ middle · $$$ highest.

4 Countertop Filters and 2 Helpful Parts

One of each countertop type, then two small parts that solve the most common snags.

Easiest diverter setup

Aquasana Countertop Water Filter with Faucet Diverter

Diverter valve2 adapters in the boxPush-in tubingPre-filterSee listing

The box includes the diverter, two sizes of metal faucet adapters and push-in tubing. Aquasana’s guide is five steps: remove the aerator, attach the diverter, connect the tubing, load the pre-filter and flush for 10 minutes.

Expect the diverter to drip on and off for the first 72 hours while the filters soak through. It does not fit pull-out sprayer faucets.

Why it made the list

  • Two adapter sizes included
  • Push-in tubing
  • Clear five-step guide
Keep in mind

  • Not for pull-out sprayers
  • Cold water only
Best for: Standard faucets with a screw-off aerator.

Check Aquasana Countertop Price on Amazon →

Best RO that hooks to the faucet

APEC Countertop Reverse Osmosis Water Filter (RO-CTOP)

Reverse osmosisFaucet diverterDrain outlet10 to 15 min first flushSee listing

A countertop RO unit that runs from the faucet: the diverter feeds tap water in, and the reject water leaves through an outlet on the adapter into the sink. APEC says to flush a new membrane for 10 to 15 minutes and pour that water away.

Feed water must be 40 to 100°F, never hot, and pressure no higher than 100 psi.

Why it made the list

  • RO filtering on the counter
  • Several valve adapters
  • No under-sink work
Keep in mind

  • Sends reject water to the sink
  • Filters only while the faucet runs
Best for: Renters who want reverse osmosis.

Check APEC Countertop RO Price on Amazon →

Best no-hookup RO

AquaTru Classic Countertop Reverse Osmosis Water Purifier

Reverse osmosisNo plumbingPlugs in3 filters$$$

No hookup at all: fill the tap water tank by hand and plug it in. Setup is installing the three filters, washing and filling the tank, then running and pouring away four full tanks.

Keep it away from the stove, the microwave and direct sun. AquaTru lists an operating range of 40 to 100°F.

Why it made the list

  • Nothing to connect
  • Filters twist in by hand
  • Works away from the sink
Keep in mind

  • Needs an outlet
  • Refill the tank by hand
Best for: Faucets that will not take a diverter.

Check AquaTru Classic Price on Amazon →

Easiest gravity setup

Waterdrop King Tank 2.25-Gallon Gravity Water Filter

Stainless steelNo powerNo toolsWater-level window$$

Gravity setup is assembly, not installation. Waterdrop says it installs in minutes with no power or tools.

If water barely drips at first, its FAQ says to soak the carbon cartridges until they sink, then refit them. Empty the lower tank before refilling the top one so the joint does not leak.

Why it made the list

  • No tools or power
  • Sits anywhere
  • 2.25 gallons per fill
Keep in mind

  • Cartridges may need soaking first
  • About 20.4 inches tall
Best for: Counters away from the sink.

Check Waterdrop King Tank Price on Amazon →

Best if the diverter will not fit

Faucet Aerator Adapter Kit, Male and Female Threads

Male and femaleSeveral sizesWashersMetal$

Most standard aerators use 15/16-27 male or 55/64-27 female threads. If neither adapter in the filter box fits, a kit with more sizes can bridge the gap.

Take the old aerator along to compare, or check the faucet maker’s thread size first.

Why it made the list

  • Fits more faucets
  • Low price tier
  • Reusable
Keep in mind

  • Check the thread size first
  • Will not fix pull-out sprayers
Best for: Faucets the included adapters do not fit.

Check Aerator Adapter Kit Price on Amazon →

Best for a stuck aerator

Rubber Grip Pads for Jars and Lids

RubberNo toolsProtects chromeDoubles as a jar opener$

An old aerator can be tight. A rubber grip pad gives a firm hold by hand and keeps pliers off the chrome.

If it still will not turn, wrap it in a cloth before reaching for pliers.

Why it made the list

  • Protects the finish
  • Doubles as a jar opener
  • Low price tier
Keep in mind

  • Will not shift a seized aerator
  • One more drawer item
Best for: Aerators that will not turn by hand.

Check Rubber Grip Pads Price on Amazon →

Before You Start: Which Type Do You Have?

TypeConnects toSetupFirst water
Faucet-connected filterThe faucet, with a diverterSwap the aerator for the diverterFlush about 10 minutes (Aquasana)
Countertop RO with a diverterThe faucet, with a drain outlet into the sinkFit the diverter and tubingFlush 10 to 15 minutes (APEC)
Plug-in countertop ROA wall outlet onlyFit the filters, fill the tankPour away 4 full tanks (AquaTru)
Gravity tankNothingAssemble and fit the elementsPour away the first batch

Check the faucet

Diverter types need a screw-off aerator. Aquasana says its filter does not fit pull-out sprayer faucets.

Cold water only

Aquasana says cold water only, and APEC lists 40 to 100°F feed water.

Check the space

Faucet types sit beside the sink; plug-in RO needs an outlet; gravity tanks stand about 20 inches tall.

How to Install a Faucet-Connected Countertop Filter

  1. Unscrew the aerator. Turn it by hand from below; a rubber grip pad or a cloth protects the finish.
  2. Match the threads. Male threads are on the outside, female on the inside. Most standard aerators are 15/16-27 male or 55/64-27 female. Pick the adapter that fits.
  3. Screw on the diverter by hand, with the rubber washer seated inside the swivel collar.
  4. Push the tubing into the filter. If a joint leaks, pull the hose out and push it back in.
  5. Load the pre-filter if your model has one.
  6. Flush: run cold water, switch the diverter to filtered and let it run for about 10 minutes.
  7. Use it: switch the diverter off for hot water. Some dripping in the first 72 hours is normal.

Hole and faucet questions? See kitchen faucet hole sizes.

How to Set Up a Countertop Reverse Osmosis Filter

Faucet-fed RO (like the APEC RO-CTOP):

  1. Remove the aerator and fit the diverter adapter. If it does not match, try the other valve adapters in the box.
  2. Put the purified water tube in a clean container and let the drain outlet empty into the sink.
  3. Turn the cold water on full and pull the diverter knob to send water into the unit.
  4. Flush a new membrane for 10 to 15 minutes and pour that water away.
  5. Change the first two filters about every 6 months (600 to 800 gallons) and the membrane every 2 to 5 years.

Plug-in RO (like the AquaTru Classic):

  1. Twist the three filters into place, clockwise.
  2. Hand wash both tanks, fill the tap water tank and set them in place.
  3. Plug it in and switch it on. The first cycle takes longer.
  4. Run and pour away four full tanks before drinking.

Keep plug-in units away from the stove, the microwave and direct sun.

How to Set Up a Gravity Water Filter

  1. Wash your hands and rinse the tanks before handling the elements.
  2. Prime the elements if the maker says to: saturate them with cold water. A primed element sinks in water; one that bobs back up needs more.
  3. Fit each element through the base of the top tank with its washer and wing nut, hand tight only. Tools can damage the threads.
  4. Fit the spigot with a washer on each side, hand tight, and set it to off.
  5. Stack the tanks, fill the top with cold water and let it filter.
  6. Condition it: drain the first batch, let the elements stand overnight, refill, filter for an hour and run the spigot for 2 minutes.
  7. Empty the lower tank before each refill so it cannot overflow at the joint.

Choosing one? See the best gravity water filters.

Fixes for Common Setup Problems

ProblemLikely causeFix
Diverter leaks at the faucetWasher not seated, or the wrong adapterSeat the rubber washer inside the swivel collar; try the other adapter
Tubing leaksHose not pushed all the way inPull it out and push it back in firmly
Diverter drips after useNormal for the first 72 hoursWait for the filters to soak through
Gravity filter barely dripsElements not primedSoak or prime them until they sink, then refit
Leak where the gravity tanks meetLower tank overfilledEmpty the lower tank before refilling the top
RO makes little waterLow water pressureAPEC rates production at 20 to 60 psi; low pressure means more reject water

Low pressure at the sink? See what causes low water pressure in a kitchen sink.

Countertop Filter Setup Tips

Five habits that prevent most problems.

Tip 1

Cold water only

Aquasana says cold water only; APEC says never hot.

Tip 2

Hand tight

Diverters, spigots and gravity elements go on by hand.

Tip 3

Flush first

Run and pour away the first water, as the maker says.

Tip 4

Keep the aerator

Bag it and keep it for the day the filter comes off.

Tip 5

Date the filter

Write the install date on the cartridge to time the next change.

More faucet and filter guides: countertop vs under-sink filters, under-sink filters, water filter pitchers and every type of water filter.

Countertop Water Filter Installation FAQs

How do you install a countertop water filter?▼

Remove the faucet aerator, screw on the diverter, connect the tubing and flush with cold water for about 10 minutes. Plug-in RO and gravity units need no faucet hookup.

Do countertop water filters work on any faucet?▼

No. Diverter types need a screw-off aerator, and Aquasana says its countertop filter does not fit pull-out sprayer faucets.

Do I need a plumber to install a countertop water filter?▼

No. Countertop filters attach at the faucet or sit on the counter, with no pipes to cut.

How long should I flush a new countertop water filter?▼

Follow the maker: Aquasana says 10 minutes, APEC says 10 to 15 minutes for a new RO membrane, and AquaTru says to pour away four full tanks.

Why is my countertop water filter dripping?▼

It is normal at first. Aquasana says the diverter drips on and off for the first 72 hours until the filters are fully soaked.

Can hot water go through a countertop water filter?▼

No. Aquasana says cold water only, and APEC lists 40 to 100°F feed water.

How do you prime a gravity water filter?▼

Saturate each element with cold water before first use. A primed element sinks; one that bobs straight back up needs more priming.

What size is a standard faucet aerator?▼

15/16-27 male or 55/64-27 female for most standard aerators.

The Bottom Line

  • Faucet-connected: aerator off, diverter on, tubing in, 10-minute flush. The Aquasana Countertop includes two adapters.
  • Reverse osmosis: flush 10 to 15 minutes for a faucet-fed unit, or pour away four tanks from the AquaTru Classic.
  • Gravity: elements hand tight and primed, first batch poured away. The Waterdrop King Tank needs no tools.

Cold water only, hand tight only, and always flush first.


© 2026 Kitchen Guide 101 · All rights reserved · Some links are affiliate links

Scroll to Top